Deta eVolo 7.4kW 32A single phase single gun home EV charger Mode 3 (edock) EVC7001 untethered (EVC7001)
 
Introducing the Deta eVolo 7.4kW 32A single phase home EV charger Mode 3 (edock)EVC7001. This innovative charger offers charge point control, scheduling, and energy usage monitoring through a handy mobile app. It can be commissioned using a Bluetooth-enabled mobile device with a 4G connection. LED indicators make it easy to see the charging status at a glance, while PEN fault detection and isolation ensure safe and reliable operation. The Deta eVolo is a connected product that meets Smart Charge Point Regs. requirements, and features ethernet or Wi-Fi connectivity, as well as RS485 connectivity.
 
The Deta eVolo 7.4kW 32A single phase home EV charger Mode 3 (edock) EVC7001 is an easy-to-install charging solution for your electric vehicle. The mounting base plate has mains wiring terminals and rear, top, and bottom drill out cable entry points, making it suitable for both wall and post mounting. With a maximum charging power of 7.4kW and 32A, this charger will quickly charge your vehicle. Firmware updates are available OTA, and the charger is RFID ready for added convenience. Plus, with a 2-year warranty that can be extended to 3-years upon registration, you can have peace of mind knowing that your investment is protected.
 
PRODUCT FEATURES:
Untethered, compact, Mode 3 charge point
Single Phase
7.4kW charging power (max. 32A)
30mA AC and 6mA DC earth leakage protection
Charge point control, scheduling and energy usage monitoring via APP
Commissioned using a mobile device which is Bluetooth enabled and a mobile data connection, e.g. 4G
LED indicators
PEN fault detection and isolation
Connected product (as required by the Smart Charge Point Regs.) via ethernet or Wi-Fi connectivity
RS485 connectivity for load management
Charge APP needs to be downloaded to register the product so that end user can restrict use and authorize access
Easy to install: the mounting base plate has mains wiring terminals and has rear, top and bottom drill out cable entry points; the charge point attaches to the base
Suitable for wall or post mounting
Firmware updates OTA, once the product is registered
RFID ready ? feature can be enabled via eVolo website
2-Years manufacturer warranty extendable to 3-years upon registration at eVolo.uk
 
METHODS OF CONTROL:
Wi-Fi 2.4GHz network
Ethernet RJ45
Bluetooth for commissioning via APP
Remote management via cloud
OCPP 1.6J
 
SPECIFICATION:
Voltage 220V - 240V AC 50Hz
Single phase
Earthing Arrangements TN-C-S or TT
Load Management Maximum charging current can be set via the APP
Cable Size 10mm2 max 
Built-in RCD 30mA (AC), 6mA (DC)
Built-in PEN fault detection 
Built-in metering +/-2%
Surge protection: level III lightning protection, 4000 V (recommended to fit Type 2 SPD in the consumer unit)
Isolation Class II
 
PRODUCT CODE: EVC7001
 
1-2 working day lead time for delivery